No firmware changes necessary.

3d touch kits ready to fit the X2 / Genius Pro. These are replacement / upgrades for the Artillery version.

We use MKS 3d touch, they are good quality with ABS replacable pins. The cable is plug and play wired with the correct connector.

The BL Touch pin retracts cleanly into the main body, reducing the chance of the pin being damaged. Suitable for a wide range of bed materials.

No changes are required to printer firmware,

Due to the new Mc Culloch touch mount from Ethereal project 3d this kit is a simple bolt on replacement.

Our kit includes the following;

1 x MKS 3D Touch with correct cable for Artillery PCB.

1 x 3d printed X2-GPRO mount (new style)*

1 x Set M3 mounting bolts for BL Touch.

1 x 3d printed ribbon cable clamp **

*Any and all 3d printed parts are considered free of charge, and hold no monetary value.

** Please be aware that due to getting the touch sensor as close to the nozzle as possible you can no longer use the Blue decorative cover, we supply a 3d printed ribbon clamp.

Also if your original Artillery ABL sensor broke due to pin drop the MKS 3d touch sensor is not a suitable replacement.. Please choose the BL or CR touch (They have better shielding)