This is a "long" Kraken Bimetal titanium heatbreak that will fit the Artillery Hornet printer.

Due to the standard design of the PTFE lined heatbreak being slightly longer than a standard Kraken heatbreak we have sourced these Long Kraken heatbreaks.

As shown in the photos they are a similar overall length to the original.

The original heatbreak is designed for MK8 nozzles.

This Bimetal Titanium heatbreak uses V6 nozzles (included), because there is not enough clearance with MK8.

Also because of the design of the top of the bimetal heatbreak ie a short hole for the ptfe tube to sit in, it requires a small piece of PTFE to bridge the gap to the Umbilical Bowden PTFE, the standard Hornet heatbreak is flat top.

Instructions and ptfe tube spacer are provided.

1 x Bimetal titanium heatbreak

1 x 0.4 V6 nozzle (standard brass or Hardened steel option)

1 x short PTFE spacer (for top of heatbreak)